AFI VS-3SD 3 Axis Handheld Stabilizer Operation Instruction

32-bit MCU and dual sensors,more stable system, faster response and higher quality video

Support most of SLR cameras, BMPCC,smart phones video and other devices

Convenient extended port, support wireless control and devices charging

Humanized locking knob

It can start up at any angle

Multiple Modes for Free Switch 3 Normal Modes and 2 Alternative Modes

Following Mode-- Heading and pitch following

Locking Mode---Heading and pitch locking

Semi-follow Mode-- Heading following and pitch locking

Alternative mode--Following mode and locking mode

Simple Operation, Easy to Use

Long Wanranty for Balance System Firmware Upgrade Available

Specification

Model:VS-3SD

Height:300mm

Width:175mm

Depth:160mm

Packing Size:412x106x220mm

Max Load: 1.7kg camera(The axis-follow capacity will decrease if the load is over 1.7kg)

Applicable camera:Canon 5D, 6D,7D + 16-35 f4.0, 24-105 f4.0 lens and etc;Support

large micro-mono-camera and lenses, such as A7 Series+24-70/

16-35, GH4+12-35/14-40/7-14/ BMPCC and etc.

Max Angle Range: 90-180°

Range of direction axis: 355°

Tilt Range: 355°, ± 180° available during Gimbal operation.

Roll Range：355°, ±60° available during Gimbal operation.

Power: 18650 3.7V 2600mAh * 3

Working Time: 3-4 hours

(It depends on the acutal usage condition, also different as per different camera weight

or camera power.)

Circuit System: 3-axis brushless gimbal steady augmentation system