DIY 3 Axis Smart Handheld Brshless Mobile Phone Camera Stabilizer Gimbal Mount AFI V1S

Portable 3 Axis Stabilized 

SMART GIMBAL 

The user guide 

Make your own movies and live shows. 

Thank you for choosing Portable 3 Axis Gimbal. The gimbal is a smart gimbal with multi-fucntion.Please read this manual before useage. 

Note: Not include the cellphone. 

USER GUIDE 

1. Insert the Batteries 

Remove lock 

cap,insert two 

batteries into the 

handle. 

2 Install the Smartphone 

Install the 

smartphone by the 

quick-realease

adapter.And make 

sure it is fixed well. 

3. Adjust the Center of Gravity 

If the smart phone inclines towards the tilting axis, pull it towards the left to be in place, and let the center of gravity keep balance or slightly incline to the smart phone. If the smart phone still inclines towards the pitch axis. install the Counter weight Module.

* Iphone 6 plus and 5 inch above smartphone will be install the tilting axis. 

4. Power On/Off 

Check whether the phone is 

installed well, and long press the 

function button for 5 seconds to 

turn on the gimbal. Long press the

function button for 3 seconds to

turn off the gimbal. 

Warrning

1) Please install the suitable smartphone

first before and adjust balance,then 

power on the gimbal 

2) Please turn off the power when not in 

use 

Accessories 

Battery 

modle：18650 

Suitable Counter Weight 

Charger 

USB CABLE 

USB CHARGER ADAPTER (CWNED) 

Insert the micro usb of the USB CABLE into the socket of the Charger,the an-other usb of the USB Cable into the USB Charge Adatpter. 

OVERVIEW 

Basic working modes 

Shutter Button 

2. After power on, the angle of roll is not parallel with the horizon line. 

The user guide 

Make your own movies and live shows. 

Thank you for choosing Portable 3 Axis Gimbal. The gimbal is a smart gimbal with multi-fucntion.Please read this manual before useage.

 

Note: Not include the cellphone. 

*Panning Mode: the smart phone is allowed to pan left or right.Vertical tilts or rolls are restricted. 

*Panning and Tilting Mode: The smart phone is allowed to pan left or right and tilt up and down. Rolls are restricted. 

*Lock Mode: The smart phone stays in its current orientation. All Paning, tilting and rolls are restricted.

*Vertical Shooting Mode: Any mode, when the handle is vertical to the ground,rotate the handle to right 60~90 degrees for 1 second, the gimbal is enter the vertical shooting mode automatically. *Manual Pulling Lock： After the gimbal has been powered on for 10 seconds, the tilt angle can be adjusted manually in the panning mode and lock mode, Adjust the tilt angle to the desired position and wait for 1 second until the gimbal registers the new angle. 

Function Button	Function	Mode LED	Status
Single Tap	Lock Mode	Green LED always on	Three axis Lock
SingleTap	Panning Mode	Green LED one time Flashing	Tilt lock, Pan Follow
Double Tap	Panning &Tilting Mode	Green Led Two Times Flashing	Pan Follow, Tilt Follow
Triple Tap	Tilting Mode	Green LED Three Times Flashing	Pan Lock, Tilt Follow
Quadruple Tap	Reset	Green LED one time Flashing and enter	Rest to Initialization
Five Tap	Gyros Calibration	Green LED five times after successfully	Need calibration in different enviroment
Long Press for 5 Seconds	Power On
Long Press for 3 Seconds	Power Off
Shutter Single Tap	Take picture

Power LED	Mode/Status
Red Led Flashing Quickly	Battery Low Power
Red Led One Time Flashing	Battery Power<25%
Red Led Two Times Flashing	Battery Power: 25%~50%
Red Led Three Times Flashing	Battery Power: 50%~75%
Red Led Four Times Flashing	Battery Power: 75%~100%

Bluetooth Connect 

Mobile phone connection: Step1. Open the bluetooth setting on your phone and Turn on the Gimbal ,click ‘Search device’, cellphone will search for bluetooth devices automatically.

Step 2. Find the bluetooth Name:SP-G6, click and connect it. 

Step 3. Enter ‘0000’ and click ok if there’s a prompt that requires you to enter a password.

 

When the bluetooth connected, The Blue Led will be off, when press shutter button, the blue led will be flashing. 

Note: this equipment support system IOS 5.0 above, samsung android 2.3.6 above.For android is open source system, the less part of cellphones may not support bluetooth shutter function. 

Initialize&Adjust Gimbal

Initialization Instruction: 

1.Install the smartphone properly.

2.Power on the Gimbal, after 10 seconds, five tap the Function Button. Placed the gimbal on stationary flat for

10seconds,When the green light has 5 times flashing and beeping, the gimbal initialized successfully. (Please pick up the gimbal quickly once it is activated)

3.If not successfully, will be return to step 2.

 

Gimbal needs to be initialized whenever the following situations appear after power on 

1. After power on, the angle of pitch is not level with the horizon line. 

Use for switching working modes. 

Basic working modes 

Shutter Button

2. After power on, the angle of roll is not parallel with the horizon line.

3. When the gimbal is in heading static, the angle of heading moves frequently. 

Specification 

Vertical Tilting Angle：320 ° 

Horizontal Panning Angle：360 ° 

Work time：10 Hours 

Rolls Angle： 320° 

Battery Capacity: 3.7V 4000mA 

Compatible：3.5~6.1 inch smartphone

ATTENTION 

Please assemble the gimble in accordance to the diagram provided. Please charge the battery with the provided battery charger. 

Please install the camera securely before powering on the gimbal 

When the gimbal is not in use or placed on the table, please ensure it is powered off.

Welcome to wholesale the quality diy 3 axis smart handheld brshless mobile phone camera stabilizer gimbal mount afi v1s at affordable price from us. We're one of the leading manufacturers and suppliers in China, also supporting OEM and ODM service based on qualified customized orders. For more info, contact our factory now.